Device Provision
 
Refer Here for Help
Add New Device ATA or IP Phone:
           

Name

 Device Type Line Configuration Serial Number Mac Address

Codec

Line##no##: 

  
 

Available Devices including ATA's or IP Phone.
 

Name

 Type Line Configuration Device Info

Codec

    

##type##
Line ##no2##: 
Mac Address :
Serial Number:

Notes:
1. To provision devices you must point them to our provisioning servers. You can do this in two ways:
a-) Automatically: You configure the provisioning/boot server option to the DHCP server that you use in the network. Examples on how to do this can be found here: Linux and Windows example.
b-) Manually: You configure the provisioning/boot server of the device directly from its configuration interface. Read the device manual how to to this. Examples for Sipura and Linksys devices.

2. After making changes from this page you need to reboot your device for the changes to take affect. Otherwise changes will take effect after 1 hour dependent on the device's re-synchronization settings.